Items/Model
TS500( PLC)
Photo
Principle
Waste Incineration Therapy
Melt Rate
150-200 kg/hour
Control Setting
PLC( Programmable Reasoning Controller Heater)
Combustion Chamber
2700L
Inside Dimensions
190x120x120cm
Second Chamber
1300L
Smoke Filter Chamber
Yes
Feed Setting
Manual
Voltage
220V
Oil Intake (kg/hour)
Common 28
Gas Use (m3/hour)
***
Temperature Show
Digital Show
Temperature Level Safety And Security
Yes
Oil Tank
1400L
Feed Door
90x80cm
Chimney
10Meter
Smokeshaft Kind
Stainless Steel
1st.
Gross Weight
15000kg
Outdoors Dimensions
400x210x300cm( without chimney)
2020-03-21
400x210x300cm( without chimney)
The air supply should be controlled efficiently;Flame contact with all the gases should be achieved;The minimum combustion temperature of the primary chamber should not be less than 850°C;The primary combustion chamber should be equipped with a means to provide supplemental liquid fuel supply.The primary chamber should be cold face refractory lining, with a minimum thickness 100 mm.The following conditions should be met in the secondary combustion chamber:The air supply should be controlled efficiently;Flame contact with all the gases should be achieved;The size of the secondary chamber should be properly designed to ensure that the gas retention time should not be less than 2 seconds;The secondary chamber should be cold face refractory lining, with a minimum thickness 100 mm;The chamber should incorporate an integrated combustion burner air fans with automatically controlled distribution;The gas temperature, as measured against the inside wall in the secondary chamber (not in the flame zone) should not be less than 1,100°C;HICLOVER – Medical EnvironmentalWaste IncineratorsMedical Waste IncineratorPet Animal CremationSolid Waste Incinerator
Tel: +86-25-8461 0201Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]Nanjing Clover Medical Technology Co.,Ltd.2020-03-21
