Waste Incinerators Archive

medical incinerators

* medical incinerators, The insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminium and insulates bricks in order to assure a minimum temperature on the outside sheet metal. * Composition of the refractory; ?   …

Waste burners extra components

HICLOVER now supplies additional components including: — — — — Burners (diesel oil, LPG or gas) — — — — Facet for heaters — — — — Fire ropes — — Incinerator chamber maintenance items — — — — Air Follower smart

incinerator installation demo

The switchboard shall operate in a room with the following prevailing conditions:   –      Maximum ambient temperature of 40 0C –      Maximum relative humidity of 95% –      Saline atmosphere –      Altitude: at sea level –      Climate type: Wet and humid coastal conditions …

pet incinerator for sale

1.    Capacity of destruction in weight: 60 Kg/h. 2.    It should be able to operate not less than 10 hours/day 3.    This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc… 4.    Design Specification …

pet incinerators

  The panel and parts hereof shall have the following characteristics:         Finish   All metal parts shall receive a treatment taking the prevailing environment conditions into account.         The top paint colour shall be the …

incinerators china

All numbering will be carried out in compliance with the corresponding circuit diagrams and wiring list.   Component Marking         All components inside the switchboard shall be marked for identification.         The  marking  shall  be  effected  …

scientific waste incinerator up for sale

Waste kind: health care waste Waste density: 125 to 350Kg/M3 Waste calorific well worth: 4000KCAL/kg Dampness web content: 10– – 25%. Approximated ash deposit: 5– – 10%. Nominal ability: 50kg/hr set lots. 2nd chamber: 2 C. Environmental: NEMA ACT (EMCA) 1999, …